Beginner Woodshop Starter Checklist

Free for everyone, no purchase or email needed. Print it and tick off what you have. These ten tools cover most beginner plans; you don't need a $5,000 shop to start.

ToolHave it
Tape measure (25 ft)The most-used tool in any plan
Combination squareMarks square cuts and checks 90°
Circular saw or mitre sawStraight crosscuts in boards and sheet goods
Drill/driver + bit setPilot holes and screws
Clamps (four 24-inch)Hold parts while glue sets
Wood glueStronger joints than screws alone
Sanding block + 80/120/220 gritSmooth, finish-ready surfaces
Pocket-hole jigFast, hidden joints for beginner furniture
Safety glasses + hearing protectionNon-negotiable, every session
Dust mask (N95)Fine dust is a real lung hazard

Your first five weekend projects

ProjectDone
Planter boxTeaches: Straight cuts and screws
Simple bookshelfTeaches: Squaring and shelves
Step stoolTeaches: Strong joints
Garden benchTeaches: Larger cuts and finish
WorkbenchTeaches: Your shop's first upgrade
Measure twiceCheck the actual size of your lumber: a "2×4" is really about 1.5 × 3.5 inches.
Dry-fit firstAssemble without glue to check everything lines up before you commit.
Square itMeasure both diagonals. If they match, your frame is square.
SafetyKeep blades sharp, hands clear of the cut line, and never wear loose sleeves near a spinning blade.

General guidance, not professional advice. Follow your tools' manuals. © 2026 Clickszy.